Cisco Packet Tracer 3.2.2.4 Packet Tracer - Configuring Trunks

Cisco Packet Tracer

Script code for Cisco Packet Tracer 3.2.2.4 Packet Tracer - Configuring Trunks

3.2.2.4 Packet Tracer - Configuring Trunks

S1 > enable

S1 # show vlan brief

S1 # configure terminal

S1 (config)# int range g0/1-2

S1 (config-if-range)# switchport mode trunk

S1 (config-if-range)# switchport trunk native vlan 99

S1 (config-if-range)# end

S2 > enable

S2 # show vlan brief

S2 # show inter trunk

S2 # configure terminal

S2 (config)# int g0/1

S2 (config-if)# switchport trunk native vlan 99

S2 (config-if)# end

S2 # show run

S2 # configure terminal

S2 (config)# int g0/1

S2 (config-if)# switchport mode trunk

S2 (config-if)# end

S1 > enable

S1 # configure terminal

S1 (config)# int g0/1

S1 (config-if)# switchport mode trunk

S1 (config-if)# switchport trunk native vlan 99

S1 (config-if)# end

File Packet Tracer Pka Cisco Packet Tracer download 3.2.2.4 Packet Tracer - Configuring Trunks Download here

Networking ID