Home / PacketTracer

Cisco Packet Tracer 7.3.1.8 Packet Tracer - Configuring RIPv2

2 comments
Cisco Packet Tracer

Cisco Packet Tracer 7.3.1.8 Packet Tracer - Configuring RIPv2

Script Code For Cisco Packet Tracer 7.3.1.8 Packet Tracer - Configuring RIPv2

R1 > enable
R1 # configure terminal
R1 (config)# ip route 0.0.0.0 0.0.0.0 s0/0/1
R1 (config)# router rip
R1 (config)# version 2
R1 (config)# no auto-sumarry
R1 (config-router)# do show ip route connected
R1 (config-router)# network 192.168.2.0
R1 (config-router)# network 192.168.1.0
R1 (config-router)# passive-interface g0/0
R1 (config-router)# default-information originate
R1 (config-router)# end
R1 #



R2 > enable
R2 # configure terminal
R2 (config)# router rip
R2 (config)# version 2
R2 (config)# no auto-sumarry
R2 (config-router)#do show ip route connected
R2 (config-router)# network 192.168.2.0
R2 (config-router)# network 192.168.3.0
R2 (config-router)# network 192.168.4.0
R2 (config-router)# passive-interface g0/0
R2 (config-router)# end
R2 #

R3 > enable
R3 # configure terminal
R3 (config)# router rip
R3 (config)# version 2
R3 (config)# no auto-sumarry
R3 (config-router)# do show ip route connected
R3 (config-router)# network 192.168.4.0
R3 (config-router)# network 192.168.5.0
R3 (config-router)# passive-interface g0/0
R3 (config-router)# end
R3 #

File Cisco Packet Tracer Pka download Cisco Packet Tracer 7.3.1.8 Packet Tracer - Configuring RIPv2 Download here

2 comments for "Cisco Packet Tracer 7.3.1.8 Packet Tracer - Configuring RIPv2"

  1. MelisaAugust 11, 2015 at 6:01 PM


    The information you have given here is truly helpful to me. CCNA- It’s a certification program based on routing & switching for starting level network engineers that helps improve your investment in knowledge of networking & increase the value of employer’s network.
    Regards,
    ccna course in Chennai|ccna training in Chennai

    ReplyDelete
  2. jimiDecember 18, 2020 at 4:54 AM

    good work, but do you have other labs as a lab 13.1.11

    ReplyDelete